External analog temperature sensor.

External temperature sensor is used to measure temperature inside the hive. Shipped together with GSM bee hive monitor or Independent electronics with battery. Comes with cable gland for easy additional installation, with 3m long cabling. Different cable lengths at request. 

External digital temperature sensor.

External temperature sensor is used to measure temperature inside the hive. You can connect multiple temperature sensors on one input and thus measure the temperature in several hivesor more points in abee hive. Comes with cable gland for easy additional installation, with 3m long cabling. Different cable lengths at request. 

External digital temperature-humidity sensor.

External temperature-humidity sensor is used to measure the outside temperature and humidity. Comes with cable glad for easy additional installations, with 3m long cabling.

Solar panel 12V/5W for charging the 6V Pb battery.

Solar panel gradually and automatically recharges the built-in lead-acid battery 6V. Comes with cable gland for easy additional installations.

Solar panel 12V/10W for charging the 6V Pb battery.

Solar panel gradually and automatically recharges the built-in lead-acid battery 6V. Comes with cable gland for easy additional installations.

Surface magnetic contact to secure the apiary.

Magnetic contact is primarily used for securing the GSM bee hive monitor – it activates the alarm, when an intruder removes the front panel on the plywood case to reach the electronics and battery. Also prevents intruders from entering the apiary, or the caravan; eventually, it can be used to secure different cases, lids or containers. If needed, several magnetic switches can be connected in parallel and several number of places in the apiary can be secured. Comes with cable gland for additional installation.

Technical parameters:

  • Surface magnetic contact with connecting block case.
  • Weight 0,05 kg
  • Fastened to the surface with screws.
  • Width of gap to 3, 1 cm
  • Electrical load capacity of contacts max 100V/0,5A/10VA
  • Contact BS-2031 is certificated at NBÚ 

Tubular magnetic contact to secure the apiary.

Magnetic contact is primarily used for securing the GSM bee hive monitor – it activates the alarm, when an intruder removes the front panel on the plywood case to reach the electronics and battery. Also prevents intruders from entering the apiary, or the caravan; eventually, it can be used to secure different cases, lids or containers. If needed, several magnetic switches can be connected in parallel and several number of places in the apiary can be secured. Comes with cable gland for additional installation.

Technical parameters:

  • Tubular magnetic contact for discreet and reliable protection of doors and windows.
  • Weight 0,03 kg
  • Universal usage in wooden doorframe.
  • Width of gap to 2, 5 cm
  • Electrical load capacity of contacts max 100V/0,5A/10VA
  • Blade contact. 

Connecting cable.

Connecting cabling 2x 0,75mm² is meant for additional installations of magnetic contacts, solar panel, or any other external power supply and siren. Necessary to specify the length of cables when placing the order.

  • Conductor Diameter - 0,25mm2
  • Type of Wire - Stranded
  • Outer Insulation - PVC
  • Outer Colour - Grey
  • Outer Diameter - 4,0mm
  • Weight kg/km - 22
  • Peak Operating Voltage - 500V
  • Temperature Range - -40...+80 °C
  • No. of Cores - 3
  • Shield - NO 

Indoor siren.

Indoors siren 12VDC wired with red alarm light.

Technical parameters:

  • Material: ABS housing
    Working voltage: DC 12V
  • Ampere consumption: 300mA
  • Sound of the siren: 115bD/1m
  • Volume level: 108 dB/30cm
  • Size: 125 x 75 x 48mm
  • Weight: 100 g

Outdoor siren with a backup battery.

Back-up outdoors siren 12VDC 120 dB with coverage IP65.

Technical parameters:

  •  Highly resistant PC housing, UV prevention
  •  Twin piezo sounders with 120dB at 1m
  •  Single piezo sounder is optional
  •  SAB/SCB function available
  •  Positive / negative siren trigger
  •  Positive / negative strobe trigger
  •  Two way tamper switch protection
  •  LED diagnosis indication
  •  Item: Backup Battery Outdoor Siren
  •  Operating Voltage:  DC9-15V
  •  Current Consumption Standby: 380mA (alarm + strobe) 10mA
  •  Siren Output: 120dB @ 1m
  •  Flash Rate: LED, 60 times/min
  •  Backup Battery: 7.2V/500mAh NiMH
  •  IP Rating: IP-65
  •  Dimensions: 300L*220W*65Hmm
  • LED Colour:  Blue

Lead-acid battery 6V Panasonic.

Maintenance-free, with long durability thanks to gel technology. Optimal for fast parallel usage. Extra good recovery after full discharge. The highest capacity. Slightest internal resistance. High currents. Slightest spontaneous discharging. Tested in UL. Use: Solar systems, system of back-up power supply, measurement technique, etc. Durability: 6 – 9 years.

Equipment · Slightest internal resistance – Minimal spontaneous discharging.

Technical parameters:

  • Panasonic accumulator
  • Voltage:  6 V
  • Capacity:  4, 5 Ah
  • Size (l x w x h):  70 x 47 x 101 mm
  • Full height:  106 mm
  • Terminal connection: flat connector F1 4, 8 mm
  • Weight: approx. 720 g

Lead-acid battery 6V Motoma.

Maintenance-free lead-acid battery 6V 4,5Ah. Design of this battery enables it to work in any working position. Charges the electronics used in bee hive monitor.

Technical parameters:

  • AGM accumulator
  • Voltage:  6 V
  • Capacity:  4, 5 Ah
  • Size (l x w x h):  70 x 47 x 101 mm
  • Full height:  106 mm
  • Terminal connection:  flat connector F1 4, 8 mm
  • Weight:  approx. 720 g
  • Nominal capacity 25°C - 20 hours:  4,5 Ah - 10 hours: 4,3 Ah - 5 hours: 3,85 Ah - 1 hour: 3,13 Ah Internal resistance of fully charged battery:  21 m

Lead-acid battery 12V for the siren.

Maintenance-free lead-acid battery 12V 1,3Ah. Design of this battery enables it to work in any working position. Charges the siren.

Technical parameters:

  • AGM accumulator
  • Voltage:  12 V
  • Capacity:  1, 3 Ah
  • Size (l x w x h):  97 x 45 x 53 mm
  • Terminal connection:  flat connector F1 4, 8 mm
  • Weight:  approx. 560 g 

RS232/USB Adapter.

Convertor between the siren’s RS232 interface and USB host.

External GSM antenna 2,15dBi SMA(M).

GSM antenna id flexible and adhesive label 900/1800/2100MHz(m) 2,5m.

Technical parameters:

Size 4,6x15x123
Mounting Glass mount
Max. Gain 2.15 dBi
VSWR:                                   <1.5/2
Impedance 50 Ohm
Polarization horizontal
Connector type SMA male
Cable length 2.5 m
Cable type RG174
Frequency

AMPS/GSM/3G-UMTS/PCN/BLUETOOTH

External GSM antenna 5dBi SMA(M).

GSM antenna magnet. 900/1800/2100MHz(m) 2,5m.

Technical parameters:

Size 300 x dia. 30mm
Mounting Magnetic mount
Max. Gain 5 dBi
Impedance 50 Ohm
Polarization vertical
Connector type SMA male
Cable length 2.5 m
Cable type RG174
Frequency AMPS/GSM/3G-UMTS/PCN

External GSM antenna 9dBi SMA(M).

GSM antenna magnet1710 - 2150 MHz, 890 - 960 MHz,SMA(m) 5m.

Technical parameters:

  • Size:                     430 x dia. 70mm
  • Weight:                  0,346 kg
  • Mounting:               Magnetic mount
  • Max. gain               9 – 11,5 dBi
  • Impedance:            50 Ohm
  • Polarization:            vertical
  • Flaring angle:          h 360°
  • Connector type:      SMA male
  • Cable length:           5m
  • Cable type:             RG174

 

Frequency:                          1710 - 2150 MHz, 890 - 960 MHz

Cable SMA(F) – MS156(M)  for the external GSM antenna.

Connecting RF cable RG174 with connector MS-156-male - SMA-female to panel, 20 cm of length.

AC adapter 230VAC/12VDC.

Switching power adapter 12V / 1A.

Technical parameters:

Dimensions 77x52x30mm
Type Power Supplies
Output Current A 1 A
Note SMPS
Version Plug-in
Power W or VA 12W
Input Voltage 100-240Vac
Output Voltage 12Vdc
Plug Connector EURO 2-pin
Input Connector EURO Plug CEE7/16
Output Connector Universal Output Plug System

Charger of Lead-Acid Batter6V/12V.

Technical parameters:

Size: 98x68x93mm
Input Voltage VAC 230 VAC
Output Voltage DC 6.12.2014 VDC
Note Reverse Polarity Protection
Power W or VA 9,6VA
Outputs Current 0,8A
Charger Type Lead Acid
for Battery n/a
No. of Batteries 1


Cable gland.

Cable gland PG7 + sealing and female screw, PA, IP67, grey 3-6mm.